| |
|
Originator: Frank Gee
|
Level 2 Member
|
Date:
06 November, 2009 - 05:29 AM
|
Hello all,
I´d like to measure the exhaust back pressure, but had no idea how to do it. The engine is cpl 0742 6bt-5.9m, 210 hp. It has a turbo, then a mixing elbow which goes up then down, then a 90 degree fiberglass elbow to get the exhaust flowing towards the back, then about 10´ of 3.5" wet exhaust black rubber hose run to the bronze transom exhaust fitting which has a black rubber "flapper" valve on the outside of the transom. The black wet exhaust hose is half filled with seawater when the boat is at rest.
Thank you for any help. |
| |
|
|
|
Response #1 from: Bill D l
|
Level 1 Member
|
Date:
06 November, 2009 - 01:37 PM
|
|
(Archived Message - Members Only) |
| |
|
|
|
Response #2 from: Jram
|
Level 3 Member
|
Date:
06 November, 2009 - 02:47 PM
|
|
(Archived Message - Members Only) |
| |
|
|
|
Response #3 from: Bill D l
|
Level 1 Member
|
Date:
06 November, 2009 - 10:38 PM
|
|
(Archived Message - Members Only) |
| |
|
|
|
Response #4 from: Frank Gee
|
Level 2 Member
|
Date:
07 November, 2009 - 02:30 AM
|
|
(Archived Message - Members Only) |
| |
|
|
|
