|
|
| DIESEL ENGINES FOR SALE |
|
Item:
|
Professional Aftercooler Service |
|
Date: |
August 28, 2010 |
|
If you are looking for a company that knows aftercooler service and repair like no other, consider our services...........A typical 3-5 year old B, QSB, C, or QSL aftercooler service done by us runs $350 (plus return S&H) & includes ultra-sonic cleaning, new zincs & a spare set, and O-rings ..We guarantee our work and also guarantee that your aftercooler will remain serviceable for at least 3 years without any maintenance other than normal zinc replacement...............We are the best and we know it as our track record speaks for itself.....Usually a 2-4 day turn around...
Tony
tony@sbmar.com or brad@sbmar.com
http://www.sbmar.com
P.S. We also service and sell all Cummins & Yanmar aftercoolers, cores, and service parts as well |
|
Item:
|
Cummins 6CTA 8.3 M´s |
|
Date: |
August 11, 2010 |
|
(1) 6CTA 8.3 300C--Original and always run under 1800 RPM-----9000 hours and runs very very well--Pretty clean with no "cover-up" paint like most broker sold engines are..------------------- $5000
This engine can be installed and run "as-is" other than I would recommend a typical service of the seawater side and oil & filters.....
Call if you want pics or more details..
Tony |
|
Item:
|
Zero Hour Pair Of Cummins 6bta 5.9 260-270 JWAC Remans |
|
Date: |
July 16, 2010 |
|
I just finished up-fitting this -0- hour pair of hard to get JWAC 260-270 Cummmins Factory REMANS.. Fully gone thru by us "top to bottom" and are ready to go.......We can custom up-fit as needed to your requirements...........As shown, Bobtail with all the basics (new Cummins/VDO, OR our our SEAMAX instrumentation, harnesses, and everything else you would normally get from Cummins). These engines have a 2000 hour/24 month Factory warranty plus our own personal guarantee at $36000.00 for the pair including S&H 48 states..........
--Tony--http://www.sbmar.com --805 800-200BOAT-- |
|
Item:
|
CAT 3408 --Stripping for Parts |
|
Date: |
July 11, 2010 |
|
I just received a good running CAT 3408(keel cooled) that has a bad block--We are striping it for parts..Clean, no rust and other then the main block, the engine is in very good condition..
Pics of any or all are available.. Just let me know what you need--The $$ will be right. Located in S. Calif.
Tony |
|
Item:
|
(2) Cummins 6BT 5.9´s |
|
Date: |
July 07, 2010 |
|
Have a matched pair of Cummins 6BT 5.9 CPL 742, 180HP at 2500 or 210 at 2600 RPM.. All 100% original with about 8000 total hours--Always run at 1200 RPM or below in the harbor.... Run flawless.. Set up for keel cooling and have orginal high-mount turbos.. With instruments-- $10000 / pair..Located in S. Calif |
|
Item:
|
Cummins Aftercooler "O Ring" & Heat-X Gasket Sets |
|
Date: |
July 04, 2010 |
|
Cummins "O" Ring & Heat-X gasket kits that will take the hassle and pain out of dealing w/ the local distributor who has no clue and charges two arms and a leg for the O-rings & Gaskets, only to most likely sell you the wrong ones........ Just call Brad at 800 200BOAT and tell him what engine you have...It's that simple to get what you need quickly and save big $$ to boot...........
Tony
tony@sbmar.com
brad@sbmar.com |
|
Item:
|
Pair of Volvo TAMD 70´s |
|
Date: |
April 28, 2010 |
|
I just removed a decent running pair of 20 yr old Volvo TAMD 70´s..Probably about 300 HP ? They have MG506 1:1 gears on them amd had Walter RV 40´s attach to them thru a 30" drive shaft... All is running so-so to OK, but all is in need of some serious elbow grease - Total hours is under 3000..........You can have it all "as-is-where-is" for $5000..Includes original instrument panels too....Located in S. Calif.. Just one injection pump is worth that !!
Tony--Seaboard Marine |
|
|
| DIESEL PARTS FOR SALE |
|
Item:
|
NEW-------Cummins 6BTA & 6CTA ( 450 Diamond) Starter motors |
|
Date: |
September 01, 2010 |
|
Finally, we can offer a brand new starters motor built to meet Cummins specs that are an exact replacement for any "B" or "C" series marine starter motor...Perfect "Plug & Play" fit..
6BTA 330/370 Diamond (or any B series from a 4/6BT to a 370 Diamond).............Brand new including S&H to your door, 48 states at $275.00 net..........................................
Cummins 450 Diamond (and all other 8.3 C´s) Genuine Delco Replacement 38MT starters for $550 each including S&H 48 states........
Don´t leave home without one !! |
|
Item:
|
Walker AirSep Kits for the Cummins 450 Diamond |
|
Date: |
August 29, 2010 |
|
Factory New Walker AirSep kits by Seaboard Marine....
These Walker AirSep kits are especially configured by Seaboard for the Cummins 450 Diamond or the 430/450 REMAN. They are 100% "Plug and Play" too.. You can now get rid of those fumes once and for all at about 1/2 the normal price, plus end up with a superior kit & system that will give you better long term service along with way less maintenance and headaches to think about. Ever looked at the Walker kit list of parts that they want you to buy (at about twice the price) and the troubling shooting manual that deals with the maintenance and care of them? Scary !!
Exactly as shown. It even comes with the latest "Vacuum Regulator / CCE w/Relief Valve" that fits all of the latest Walker units and our own kit for a PUKE recovery system that eliminates the troublesome oil pan drain 1-way valve (just read Walker’s trouble shooting guide and their cautions on the valve).. Actually, talk about rediculous, why would you want that oily moisture/acid laden yuck & guck put back into your engine’s oil pan anyway........Plus, now you do not have to connect it to the oil pan -- another "plus" from Seaboard that is engineered as a part of our proven "Envirovent" kit for the Cummins B 5.9.....
This is a once in a lifetime bargain to UPGRADE from your old Walker system, or your paper aircleaner and Open Crank Case Breather to a Walker Airsep especially modified by SEABOARD MARINE at $425 each ( two for $800), including S&H 48 states including a spare cleaning kit for down the road maintenance ---- These won’t last long, so get em´ while the getting is good !!
And remember, these kits are guaranteed by us to be 100% "Plug & Play" and fully tested, so the install is a super easy.. Maybe a 30 miniute install compared to hours with the Walker designed kit.
That´s $425 each or two for $800, including S&H 48 states including a spare cleaning kit for down the road maintenance..
Tony ---- http://www.sbmar.com |
|
Item:
|
Sherwood Pump Replacements--SMX 1730 |
|
Date: |
August 24, 2010 |
|
Genuine SEAMAX 1730 Seawater Replacement Pumps the Cummins B & C series Diamonds
OUR SMX 1730 pump is a 100% "Plug & Play” replacement for the Cummins 270 / 315 / 330 / 370 and 430/450/480 Diamond Seawater pumps 2" x 1 3/4" "ported"...(Cummins Part # 3897691 or # 3866493)......
SPECIAL "boatdiesel.com" member special @ $700 Net / $1350 pair INCLUDING a spare impeller kit, mounting gasket and new o-rings...Non-members pay an additional $50 per pump, so be sure to tell us your log-in name to receive your INSTANT SAVINGS...........
We also offer Early Cummins 300 B and 400C SMX replacement pumps-- CPL 970, CPL 1613, CPL 1282, etc), complete with SEAMAX custom elbow upgrade & hose kit @ $850 net w/ spare impeller kit...... (Replaces Sherwood models 1716 & 1722)
Remember, our SMX pumps carry a full "no questions asked" 2 years hassle free replacement warranty.
New improved SEAMAX quality impellers from SBMar.com:
Our own improved design of superior quality impellers for most Cummins, Cat, Detroit, and John Deere pumps at the best prices around-- just drop us a note of what you need, and we´ll typically ship same day......................................
New Lower Pricing due to our ever increasing sales volume:
17000 -----------Kit price--$130 pair w/ "O" rings, SS key & rubber plug
QSB / 27000 impeller --------------Kit price--$165 pair w/ "O" ring
QSC / 26000 impeller --------------Kit price--$225 pair w/ "O" ring
QSM / 18000 impeller--------------Kit price-- $275 pair w/ Quad rings
NOTE: All pricing INCLUDES all shipping to your door-- 48 STATES.......
Just drop Brad a note or give him a call.. We are always here to serve you better..
Brad@sbmar.com or (800) 200BOAT (My Dime) |
|
Item:
|
New Cummins 21SI/22SI 130/145/160 Amp Replacement Alternators |
|
Date: |
August 21, 2010 |
|
We are now offering factory NEW 130 12VDC (factory rating) , or 12 VDC 145 or 160 AMP alternators for the Cummins 450 Diamonds and QSM-11´s ( and most other 6CTA´s, or Delco 21/22SI replacements ).These are complete w/ the Cummins pulley and will "bolt in place" for a perfect hi-output super quality replacement or spare alternator.....$450 ea complete w/ new factory pulley
Complete 130/145 /160Amp conversion kits for most of the "B" series Cummins that convert the small frame Delco the the large frame Heavy Duty 21/22SI unit are $600 each.
All kits are tested 100% "bolt-on" before shipment to make it simple...................
Includes shipping to your door--48 states..................................Ask for "Tony" |
|
Item:
|
SEAMAX PUMPS for Cummins Engines |
|
Date: |
August 21, 2010 |
|
Genuine SEAMAX 1730 Seawater Replacement Pumps the Cummins B & C series Diamonds
OUR SMX 1730 pump is a 100% "Plug & Play” replacement for the Cummins 270 / 315 / 330 / 370 and 430/450/480 Diamond Seawater pumps 2" x 1 3/4" "ported"...(Cummins Part # 3897691 or # 3866493)......
$750 each or $1400 pair INCLUDING a spare impeller kit, mounting gasket and o-rings...Includes S&H 48 states
Early Cummins SMX replacement pumps for the 300 / 315 @ 400C Cummins, complete with SEAMAX custom elbow upgrade & hose kit @ $850 net w/ spare impeller kit...... (Replaces Sherwood models 1716 & 1722)
Remember, our SMX pumps carry a full "no questions asked" 2 years hassle free replacement warranty.
New improved SEAMAX quality impellers from SBMar.com:
Our own improved design of superior quality impellers for most Cummins, Cat, Detroit, and John Deere pumps at the best prices around-- just drop us a note of what you need, and we´ll typically ship same day......................................
New Lower Pricing due to our ever increasing sales volume:
17000 -----------Kit price--$130 pair w/ "O" rings, SS key & rubber plug
QSB / 27000 impeller --------------Kit price--$165 pair w/ "O" ring
QSC / 26000 impeller --------------Kit price--$225 pair w/ "O" ring
QSM / 18000 impeller--------------Kit price-- $275 pair w/ Quad rings
NOTE: All pricing INCLUDES all shipping to your door-- 48 STATES.......
Just drop Brad a note or give him a call.. We are always here to serve you better..
Brad@sbmar.com or (800) 200BOAT (My Dime) |
|
Item:
|
SEAMAX Rawwater Pumps for the Cummins Diamonds |
|
Date: |
August 20, 2010 |
|
Genuine SEAMAX 1730 Seawater Replacement Pumps the Cummins B & C series Diamonds
OUR SMX 1730 pump is a 100% plug & play” replacement for the Cummins 270 / 315 / 330 / 370 and 430/450/480 Diamond Seawater pumps 2" x 1 3/4" "ported"...(Cummins Part # 3897691 or # 3866493)......
$750 each or $1400 pair INCLUDING a spare impeller kit, mounting gasket and o-rings...Includes S&H 48 states
Early Cummins SMX replacement pumps for the 300 / 315 @ 400C Cummins, complete with SEAMAX custom elbow upgrade & hose kit @ $850 net w/ spare impeller kit...... (Replaces Sherwood models 1716 & 1722)
Remember, our SMX pumps carry a full "no questions asked" 2 years hassle free replacement warranty.
NOTE: All pricing INCLUDES all shipping to your door-- 48 STATES.......
Just drop Brad a note or give him a call.. We are always here to serve you better..
Brad@sbmar.com or (800) 200BOAT (My Dime) |
|
Item:
|
Hydraulic Steering Components |
|
Date: |
August 17, 2010 |
|
Seafirst Hydraulic Steering
If it's time to replace or upgrade your hydraulic steering system, call us for the highest quality and most economical marine hydraulic steering components available. We stock 100's of hydraulic cylinders and steering pumps for all applications and offer the knowledge to help you design, upgrade, or replace your worn out steering. Our hydraulic cylinders are made of 100% bronze, brass & stainless steel--no aluminum / pot metal junk and our new SHP series Helm Pumps are a cut above the typical gippo stuff that you find these days...............Drop us a note of call for details..
Tony / Seaboard marine
tony@sbmar.com or tony@seafirstusa.com |
|
Item:
|
UPGRADE NOW -- Walker Airseps for the Cummins 450 Diamond |
|
Date: |
August 14, 2010 |
|
Factory New Walker AirSep kits by Seaboard Marine...
These Walker AirSep kits are especially configured by Seaboard for the Cummins 450 Diamond or the 430/450 REMAN. They are 100% "Plug and Play" too.. You can now get rid of those fumes once and for all at about 1/2 the normal price, plus end up with a superior kit & system that will give you better long term service along with way less maintenance and headaches to think about. Ever looked at the Walker kit list of parts that they want you to buy (at about twice the price) and the troubling shooting manual that deals with the maintenance and care of them? Scary !!
Exactly as shown. It even comes with the latest "Vacuum Regulator / CCE w/Relief Valve" that fits all of the latest Walker units and our own kit for a PUKE recovery system that eliminates the troublesome oil pan drain 1-way valve (just read Walker’s trouble shooting guide and their cautions on the valve).. Actually, talk about ridiculous, why would you want that oily moisture/acid laden yuck & guck put back into your engine’s oil pan anyway........Plus, now you do not have to connect it to the oil pan -- another "plus" from Seaboard that is engineered as a part of our proven "Envirovent" kit for the Cummins B 5.9.....
This is a once in a lifetime bargain to UPGRADE from your old Walker system, or your paper aircleaner and Open Crank Case Breather to a Walker Airsep especially modified by SEABOARD MARINE at $425 each ( two fro $800), including S&H 48 states including a spare cleaning kit for down the road maintenance ---- These won’t last long, so get em´ while the getting is good !!
And remember, these kits are guaranteed by us to be 100% "Plug & Play" and fully tested, so the install is a super easy.. Maybe a 30 minute install compared to hours with the Walker designed kit.
That’s $425 each or two for $800, including S&H 48 states including a spare cleaning kit for down the road maintenance.........
Tony ---- http://www.sbmar.com |
|
Item:
|
Walker AirSeps |
|
Date: |
August 14, 2010 |
|
Factory Brand New Walker AirSep kits....Originally used for the Cummins QSC but easily adaptable to other engines.. Made for a 5" turbo, but easy to adapt to a smaller turbo with our custom High-Temp inserts that are included at no charge (we have 4.5 and 4" adapters) ..........Exacty as shown. It even comes with the lastest "Vacuum Regulator, CCE w/Relief Valve" that fit all of the latest Walker units... Ever priced one from "Walker Direct" ?
A once in a lifetime bargain at $325 each... For the Detroit owner w/ twin Turbos (8-9´s2 and 8-71´s) , we are selling 4 units kits with the 5 x 4.5" or 4" turbo adapters for $1250 including S&H 48 states---- Well under 1/2 price even after you make up some hose connections for the drains, etc... -- Just the element alone is worth about $200 from Walker........These won´t last long, so get em´ while the getting is good !!
Tony ---- http://www.sbmar.com |
|
Item:
|
Cummins Fuel Coolers |
|
Date: |
August 13, 2010 |
|
Increase your HP w/ new Cummins Fuel Coolers...Very high quality, 100% SS 316 or Cu-Ni construction, as removed from new Cummins 6BTA & 6CTA 8.3 engines... 1 7/8" ~ 2" water hose ( O.D. same as std 1.5" IPS pipe) and are designed for fuel return line flows up to about 100gph......New "Fleet pricing of $200 + ea...Now, $85 each including shipping--48 states........ |
|
Item:
|
Sherwood 1730 Replacement Pumps |
|
Date: |
August 12, 2010 |
|
Genuine SEAMAX 1730 Seawater Replacement Pumps the Cummins B & C series Diamonds
OUR SMX 1730 pump is a 100% plug & play” replacement for the Cummins 270 / 315 / 330 / 370 and 430/450/480 Diamond Seawater pumps 2" x 1 3/4" "ported"...(Cummins Part # 3897691 or # 3866493)......
$750 each or $1400 pair INCLUDING a spare impeller kit, mounting gasket and o-rings...Includes S&H 48 states
Early Cummins SMX replacement pumps for the 300 / 315 @ 400C Cummins, complete with SEAMAX custom elbow upgrade & hose kit @ $850 net w/ spare impeller kit...... (Replaces Sherwood models 1716 & 1722)
Remember, our SMX pumps carry a full "no questions asked" 2 years hassle free replacement warranty.
New improved SEAMAX quality impellers from SBMar.com:
Our own improved design of superior quality impellers for most Cummins, Cat, Detroit, and John Deere pumps at the best prices around-- just drop us a note of what you need, and we´ll typically ship same day......................................
New Lower Pricing due to our ever increasing sales volume:
17000 -----------Kit price--$130 pair w/ "O" rings, SS key & rubber plug
QSB / 27000 impeller --------------Kit price--$165 pair w/ "O" ring
QSC / 26000 impeller --------------Kit price--$225 pair w/ "O" ring
QSM / 18000 impeller--------------Kit price-- $275 pair w/ Quad rings
NOTE: All pricing INCLUDES all shipping to your door-- 48 STATES.......
Just drop Brad a note or give him a call.. We are always here to serve you better..
Brad@sbmar.com or (800) 200BOAT (My Dime) |
|
Item:
|
Cummins Remote Oil Filter Kits |
|
Date: |
August 10, 2010 |
|
Cummins factory B series remote oil filter kits--Removed from new Cummins 5.9 Diamonds and fit any B series engine. They are 100% complete as shown....Cummins factory $$ at over $800 each..They can be mounted on the engine, or off the engine if more convienent..........$400 including S&H 48 states.. Limited supply..
Tony or Brad -- 805 3826287 or 800-200BOAT
http://www.sbmar.com |
|
Item:
|
NEW Cummins Air heater assemblies |
|
Date: |
August 09, 2010 |
|
I have a very limited supply of complete air heater harnesses "as removed" from NEW Cummins 6BTA and 6CTA Diamond engines.. These are complete w/ all wiring, ECM, solenoids, senders, etc.... New from Cummins about $1000++--------Bargain price while supply lasts at $350 ea for any "C" series and $450 for any "B" series-------includes shipping / 48 states................................. |
|
Item:
|
SEAMAX 1730 Cummins Seawater Pumps |
|
Date: |
August 06, 2010 |
|
Genuine SEAMAX 1730 Seawater Replacement Pumps the Cummins B & C series Diamonds
OUR SMX 1730 pump is a 100% plug & play” replacement for the Cummins 270 / 315 / 330 / 370 and 430/450/480 Diamond Seawater pumps 2" x 1 3/4" "ported"...(Cummins Part # 3897691 or # 3866493)......
$750 each or $1400 pair INCLUDING a spare impeller kit, mounting gasket and o-rings...Includes S&H 48 states
Early Cummins SMX replacement pumps for the 300 / 315 @ 400C Cummins, complete with SEAMAX custom elbow upgrade & hose kit @ $850 net w/ spare impeller kit...... (Replaces Sherwood models 1716 & 1722)
Remember, our SMX pumps carry a 2 years hassle free replacement warranty
New improved SEAMAX quality impellers from SBMar.com:
Our own improved design of superior quality impellers for most Cummins, Cat, Detroit, and John Deere pumps at the best prices around-- just drop us a note of what you need, and we´ll typically ship same day......................................
New Lower Pricing due to our ever increasing sales volume:
17000 -----------Kit price--$130 pair w/ "O" rings, SS key & rubber plug
QSB / 27000 impeller --------------Kit price--$165 pair w/ "O" ring
QSC / 26000 impeller --------------Kit price--$225 pair w/ "O" ring
QSM / 18000 impeller--------------Kit price-- $275 pair w/ Quad rings
All pricing includes shipping to your door-- 48 STATES....... |
|
Item:
|
Cummins "B" series starters |
|
Date: |
August 05, 2010 |
|
New Cummins "B series Starters built to exacting OEM specifications or better.. Made specifically for the 330/370 Diamonds, QSB's, and older 6BT & 6BTA's---------------------- $250 ea including S&H 48 states........
Tony / Seaboard Marine |
|
Item:
|
Cummins "O" Ring Kits |
|
Date: |
August 05, 2010 |
|
Cummins "O" Ring & Heat-X gasket kits that will take the hassle and pain out of dealing w/ the local distributor who has no clue and charges two arms and a leg for the O-rings & Gaskets, only to most likely sell you the wrong ones........ Just call Brad at 800 200BOAT and tell him what engine you have...It's that simple to get what you need quickly and save big $$ to boot...........
Tony
tony@sbmar.com
brad@sbmar.com
DEALER & SERVICE TECH INQUIRERIES INVITED.. Just drop us a note... |
|
Item:
|
Factory New Walker AirSep kits |
|
Date: |
July 29, 2010 |
|
Factory Brand New Walker AirSep kits....Originally used for the Cummins QSC but easily adaptable to other engines.. Made for a 5" turbo, but easy to adapt to a smaller turbo with our custom High-Temp inserts that are Included at no charge (we have 4.5 and 4" adapters) ..........Exacty as shown. It even comes with the lastest "Vacuum Regulator, CCE w/Relief Valve" that fit all of the latest Walker units... Ever priced one from "Walker Direct" ?
A once in a lifetime bargain at $325 each... For the Detroit owner w/ twin Turbos (8-9´s2 and 8-71´s) , we are selling 4 units kits with the 5 x 4.5" or 4" turbo adapters for $1250 including S&H 48 states---- Well under 1/2 price even after you make up some hose connections for the drains, etc... -- Just the element alone is worth about $200 from Walker........These won´t last long, so get em´ while the getting is good !!
Tony ---- http://www.sbmar.com |
|
Item:
|
Cummins "O" Ring and Heat-X Gasket Kits |
|
Date: |
July 23, 2010 |
|
Cummins "O" Ring kits for all sytles of B, C, QSB, QSC, QSL annd QSM aftercoolers, and heat exchangers that will take the hassle and pain out of dealing w/ the local distributor who has no clue and charges two arms and a leg for the O-rings and seals, only to most likely sell you the wrong ones........ Just call Brad at 800 200BOAT and tell him what engine you have...It's that simple...........
Tony
tony@sbmar.com
brad@sbmar.com |
|
Item:
|
New Walker AirSeps at Drastic Discounts |
|
Date: |
July 12, 2010 |
|
Factory Brand New Walker AirSep kits....Originally used for the Cummins QSC but easily adaptable to other engines.. Made for a 5" turbo, but easy to adapt to a smaller turbo with our custom High-Temp inserts that are Included at no charge (we have 4.5 and 4" adapters) ..........Exacty as shown. It even comes with the lastest "Vacuum Regulator, CCE w/Relief Valve" that fit all of the latest Walker units... Ever priced one from "Walker Direct" ?
$325 each... For the Detroit owner w/ twin Turbos (8-9´s2 and 8-71´s) , we are selling 4 units kits with the 5 x 4.5" turbo adapters for $1250 including S&H 48 states---- Well under 1/2 price even after you make up some hose connections for the drains, etc... -- Just the element alone is worth about $200 from Walker........These won´t last long, so get em´ while the getting is good !!
Tony ---- http://www.sbmar.com |
|
Item:
|
Walker Airsep kit for the Cummins 450 Diamond |
|
Date: |
July 08, 2010 |
|
---Start the New Year Right---
Factory New Walker AirSep kits....Originally made for the higher HP Cummins QSC, but now available from us as re-designed "Plug and Play" kits for the Cummins 450 Diamond.. You can now get rid of those fumes once and for all for about 1/2 the normal price, plus end up with a much simpler kit & system that will give you better long term service along with way less maintenance and headaches to think about. Ever looked at the Walker kit list of parts that they want you to buy (at about twice the price) and the troubling shooting manual that deals with the maintenance and care of them? Scary !!
Exactly as shown. It even comes with the latest "Vacuum Regulator, CCE w/Relief Valve" that fits all of the latest Walker units and our own PUKE recovery system that eliminates the troublesome oil pan drain 1-way valve (just read Walker’s trouble shooting guide and there cautions on the valve).. Actually, talk about rediculous, why would you want that oily moisture/acid laden yuck & guck put back into your engine’s oil pan anyway.. That is unbelievably stupid when you think about the ramifications of it......Plus, now you do not have to connect it to the oil pan -- another "plus" from Seaboard that is engineered as a part of our proven "Envirovent" kit for the Cummins B 5.9.....
This is a once in a lifetime bargain to UPGRADE from your paper aircleaner and Open Crank Case Breather to a Walker Airsep especially modified by SEABOARD MARINE at $425 each, including S&H 48 states and a spare cleaning kit for down the road maintenance ---- These won’t last long, so get em´ while the getting is good !!
And remember, these kits are guaranteed by us to be 100% "Plug & Play" and fully tested, so the install is a super easy.. Maybe a 30 miniute install compared to hours with the Walker designed kit.
Tony ---- http://www.sbmar.com |
|
|
| TRANSMISSIONS FOR SALE |
|
Item:
|
Current GOOD Used gear inventory |
|
Date: |
September 02, 2010 |
|
Current stock of GOOD used transmissions.. Ready to use and will give you good long term service with no hassles...
(2) Matched Pair of Twin Disc 5114A 2:1´s.. Excellent condition as removed.. No rust, SAE#1, 14"
(2) Twin Disc MG5085 2.33:1 ratio (not a down angle) --SAE#3/11.5" flywheel ( Cummns B´s & C´s & others)
(2) Twin Disc MG506 1:1 ratio ( co-axial not a down angle) --SAE#2/11.5" flywheel (Volvo´s & others w/ #2 housing)--Typically used in jet or v-drive applications
(2) Twin Disc MG506 2:1 ratio --SAE#3/11.5" flywheel ( Cummns B´s & C´s & others)
And of course, we have lots of new ZF & DMT Heavy Duty workboat gears in stock...Pricing?? The best around, just tell us what you are interested in..
Tony
http://www.sbmar.com |
|
Item:
|
Twin Disc MG 514DC 4.5:1 |
|
Date: |
August 08, 2010 |
|
Just removed.........Good working Twin Disc MG514DC 4.5:1 .....Came of the back of a CAT 343 rated at 245HP at 1800RPM.. Total Hours unknown (30,000 ?) but the trans works fine... SAE#0 with a 14" RBD coupling..
$3000.........
Tony |
|
Item:
|
FACTORY NEW ZF Marine Transmissions |
|
Date: |
July 29, 2010 |
|
Factory NEW ZF 220A gears -- any ratio, w/ all adaptation hardware (Centa or Vulkan torsional couplings) for all Cummins B´s & QSB´s -----standard SAE#3 / 11.5" flywheels..
Complete "Bolt-On" package $4100 ea / $8000 pair............ Includes insured shipping & handling to your door- 48 states
Options available for the Yanmar 6LPA,CAT 3208,3116 and 3126 adaptation, and trolling valves..................................Similar discounts for other ZF / Hurth gears along w/ free engineering & consultation help for your custom installation...
Remember, if you are shopping any size factory new "ZF" gear, give us a call as we will save you not only $$, we will add value & trust that you will not get anyplace else when you have any questions about your application needs. That´s what we are all about, just ask around.......
Call Tony or Brad @ 800 200BOAT (2628).....................
http://www.sbmar.com |
|
Item:
|
Pair Twin Disc MG5085 2.33:1 gears |
|
Date: |
July 28, 2010 |
|
I just removed a pair of Twin Disc MG 5085SC 2.33:1 gears-- Under 4000 easy hours and are in flawless condition. SAE#3 w/ couplings.. $8000 / pair.. Had to make a ratio & GEAR change.. |
|
Item:
|
Factory New ZF 220 (PL) 3:1 Marine Transmission |
|
Date: |
July 26, 2010 |
|
Factory New ZF 220 3:1 marine gear ( not a down angle).... Hard to get model, but a "deal" went South.......With or without SAE adaptation for either #3 or #2 housings.... $3200 delivered 48/states sans adaptation..
Tony |
|
Item:
|
Alpha Diesel Outdrive |
|
Date: |
July 14, 2010 |
|
Complete ALPHA II Diesel Outdrive assembly--Factory NEW in boxes and 100% complete w/ all except props....$1500--located S. Calif. |
|
|
| MISC FOR SALE |
|
Item:
|
Professional Aftercooler Service |
|
Date: |
August 07, 2010 |
|
If you are looking for a company that knows aftercooler service and repair like no other, consider our services...........A typical 3-5 year old B, QSB, C, or QSL aftercooler service done by us runs $350 (plus return S&H) includes ultra-sonic cleaning, new zincs & a spare set, and O-rings ..We guarantee our work and also guarantee that your aftercooler will remain serviceable for at least 3 years without any maintenance other than normal zinc replacement...............We are the best and we know it as our track record speaks for itself.....Usually a 2-4 day turn around...
Tony
tony@sbmar.com
http://www.sbmar.com
P.S. We also service and sell all other Cummins & Yanmar aftercoolers as well |
|
|
| PROPS AND STERN GEAR FOR SALE |
|
Item:
|
Seafirst Hydraulic Steering |
|
Date: |
July 25, 2010 |
|
Seafirst Hydraulic Steering
If it's time to replace or upgrade your hydraulic steering system, call us for the highest quality and most economical marine hydraulic steering components available. We stock 100's of hydraulic cylinders and steering pumps for all applications and offer the knowledge to help you design, upgrade, or replace your worn out steering. Our hydraulic cylinders are made of 100% bronze, brass & stainless steel--no aluminum / pot metal junk..Our HELM PUMPS have commercial quality features only found in much more expensive units and are simple to install............Drop us a note of call for details..
Tony / Seaboard marine
tony@sbmar.com or tony@seafirstusa.com |
|
Item:
|
Bravo Hydraulic Power Steering Cylinder Kits |
|
Date: |
July 22, 2010 |
|
Mercruiser Power Steering Cylincer & Mount Kits--------I have 10 factory new power steering kits .. Part # 86165A 2.. Exactly as pictured---- $125 each including S&H 48 states..
Tony |
|
Item:
|
New Bravo 2 SS props |
|
Date: |
July 20, 2010 |
|
I have 19 factory new Bravo 2 SS high performance props.. New list price in around $1000 ea and we are selling them for $175 each including S&H 48 states..
The list:
(6) 48 987550AOA0 22.5"
(8) 48 987550AOA06
(5) have no number stamped on them
(I believe they are all exactly the same)
When measured accurately, they have a 9.75" radius, which I believe would make them a 19.5" diameter prop.. All have some cupping on the blades.
Tony |