CURRENT POSTS:  0 from past 7 Days TOTAL POSTS:  66 posts [Members]

BOATDIESEL FORUMS POWERTRAIN Repowering Repowering:Egg Harbor

TOPIC DETAIL

Topic:  1984 36' Egg Harbor

Originator: Pat Riley Guest Date:  28 August, 2005 - 02:49 PM    How fast can i push this hull? It has sharp chines not the rounded ones i've seen on earlier models. Other than the weight i don't see why this hull wouldn't fly.also what does it mean to over power a boat? What happens? I think in any sea conditions you need to adjust speed accordingly, but on a flat day what reasons are there why i couldnt push this at 30+ knots. Thinking abut repowering but i need to know what to expect before investing the $$$ and time. Also thinking about the cat 3208 factory rebuilds in the 400+ hp range. They must fit cause i've seen boats listed with them although i'm not set on cat, i just need diesels for the range. Help !

Response #1 from: Bob Mitchell Level 1 Member Date:  28 August, 2005 - 03:04 PM    (Archived Message - Members Only)

Response #2 from: Nicholas Esposito Guest Date:  26 September, 2005 - 11:40 PM    (Archived Message - Members Only)

Response #3 from: Pat Riley Guest Date:  03 February, 2006 - 08:27 PM    (Archived Message - Members Only)

Response #4 from: Jim Drivick Level 1 Member Date:  04 February, 2006 - 02:43 PM    (Archived Message - Members Only)

Response #5 from: Pat Riley Guest Date:  15 May, 2006 - 02:19 PM    (Archived Message - Members Only)

Response #6 from: Douglas J LeBlanc Level 1 Member Date:  15 May, 2006 - 04:17 PM    (Archived Message - Members Only)

Response #7 from: Paul Foulston Level 3 Member Date:  16 May, 2006 - 12:32 PM    (Archived Message - Members Only)

Response #8 from: Pat Riley Guest Date:  16 May, 2006 - 12:57 PM    (Archived Message - Members Only)

Response #9 from: Paul Foulston Level 3 Member Date:  17 May, 2006 - 07:19 AM    (Archived Message - Members Only)

Response #10 from: Pat Riley Guest Date:  05 June, 2006 - 12:49 PM    (Archived Message - Members Only)

Response #11 from: Pat Riley Guest Date:  05 June, 2006 - 01:05 PM    (Archived Message - Members Only)

Response #12 from: Pat Riley Guest Date:  02 August, 2006 - 01:45 PM    (Archived Message - Members Only)

Response #13 from: Jim Bohn Level 1 Member Date:  02 August, 2006 - 02:46 PM    (Archived Message - Members Only)

Response #14 from: Jack Guest Date:  02 August, 2006 - 05:44 PM    (Archived Message - Members Only)

Response #15 from: Tony Athens Forums Moderator Date:  02 August, 2006 - 08:30 PM    (Archived Message - Members Only) Seaboard Marine   2947 W. 5th St.,Oxnard, California ,  93030, United States Tel: (805) 3826287,  Fax: (805) 984-3474,  ,  Email

Response #16 from: Pat Riley Guest Date:  14 August, 2006 - 08:34 PM    (Archived Message - Members Only)

---