ERROR:
CURRENT POSTS: 60 from past 7 Days TOTAL POSTS: 19,951 posts [Members ]
Topic: Boatdiesel Rebuild
Originator: Blackfinmike
Date:
25 September, 2009 - 07:55 PM
Ok, its been a while to get this going, Bill D´s old motors. Hopefully Bill will tell the story, as I believe with alot of overheat and blow-by posts it will be beneficial for the forum. Any suggestions for the direction I should head will be very much appreciated. I never rebuilt a motor before. I believe that I should hone out the cylinders new rings, bearings and pistons, and to send the head out. Do I sound on target. Thank you, Mike
Response #1 from: Bill D l
Date:
25 September, 2009 - 09:10 PM
(Archived Message - Members Only)
Response #2 from: Blackfinmike
Date:
25 September, 2009 - 09:33 PM
(Archived Message - Members Only)
Response #3 from: Bill D l
Date:
26 September, 2009 - 02:12 PM
(Archived Message - Members Only)
Response #4 from: Blackfinmike
Date:
26 September, 2009 - 06:12 PM
(Archived Message - Members Only)
Response #5 from: Ski in NC
Date:
26 September, 2009 - 07:29 PM
(Archived Message - Members Only)
Response #6 from: Blackfinmike
Date:
27 September, 2009 - 03:28 AM
(Archived Message - Members Only)
Response #7 from: Blackfinmike
Date:
27 September, 2009 - 03:30 AM
(Archived Message - Members Only)
Response #8 from: Ski in NC
Date:
27 September, 2009 - 04:11 AM
(Archived Message - Members Only)
Response #9 from: Blackfinmike
Date:
27 September, 2009 - 11:10 AM
(Archived Message - Members Only)
Response #10 from: Bill D l
Date:
27 September, 2009 - 02:43 PM
(Archived Message - Members Only)
Response #11 from: Tony Athens
Date:
27 September, 2009 - 03:14 PM
(Archived Message - Members Only)
Seaboard Marine 2947 W. 5th St.,Oxnard, Tel: (805) 3826287, Fax: (805) 984-3474, , Email
Response #12 from: Blackfinmike
Date:
27 September, 2009 - 03:51 PM
(Archived Message - Members Only)
Response #13 from: Ski in NC
Date:
27 September, 2009 - 04:15 PM
(Archived Message - Members Only)
Response #14 from: Bill D l
Date:
27 September, 2009 - 04:15 PM
(Archived Message - Members Only)
Response #15 from: Tony Athens
Date:
27 September, 2009 - 04:21 PM
(Archived Message - Members Only)
-Cummins Marine Cylinder heads-
Seaboard Marine 2947 W. 5th St.,Oxnard, Tel: (805) 3826287, Fax: (805) 984-3474, , Email
Response #16 from: Blackfinmike
Date:
27 September, 2009 - 10:23 PM
(Archived Message - Members Only)
Response #17 from: Bill D l
Date:
28 September, 2009 - 12:56 AM
(Archived Message - Members Only)
Response #18 from: Tony Athens
Date:
28 September, 2009 - 01:01 AM
(Archived Message - Members Only)
Seaboard Marine 2947 W. 5th St.,Oxnard, Tel: (805) 3826287, Fax: (805) 984-3474, , Email
Response #19 from: Ski in NC
Date:
28 September, 2009 - 01:21 AM
(Archived Message - Members Only)
Response #20 from: Blackfinmike
Date:
28 September, 2009 - 02:02 AM
(Archived Message - Members Only)
Response #21 from: Bill D l
Date:
28 September, 2009 - 03:01 PM
(Archived Message - Members Only)
Response #22 from: Blackfinmike
Date:
28 September, 2009 - 08:42 PM
(Archived Message - Members Only)
Response #23 from: Bill D l
Date:
29 September, 2009 - 12:39 AM
(Archived Message - Members Only)
Response #24 from: Blackfinmike
Date:
29 September, 2009 - 08:39 PM
(Archived Message - Members Only)
Response #25 from: Bill D l
Date:
30 September, 2009 - 08:02 PM
(Archived Message - Members Only)
Response #26 from: Blackfinmike
Date:
04 October, 2009 - 12:01 PM
(Archived Message - Members Only)
Response #27 from: Blackfinmike
Date:
11 October, 2009 - 02:55 PM
(Archived Message - Members Only)
Response #28 from: Tony Athens
Date:
11 October, 2009 - 03:50 PM
(Archived Message - Members Only)
Seaboard Marine 2947 W. 5th St.,Oxnard, Tel: (805) 3826287, Fax: (805) 984-3474, , Email
Response #29 from: Blackfinmike
Date:
11 October, 2009 - 04:45 PM
(Archived Message - Members Only)
Response #30 from: Tony Athens
Date:
11 October, 2009 - 08:20 PM
(Archived Message - Members Only)
-450 Diamond-P7100 Injection Pump
Seaboard Marine 2947 W. 5th St.,Oxnard, Tel: (805) 3826287, Fax: (805) 984-3474, , Email
Response #31 from: Blackfinmike
Date:
11 October, 2009 - 11:16 PM
(Archived Message - Members Only)
Response #32 from: Blackfinmike
Date:
15 November, 2009 - 10:42 PM
(Archived Message - Members Only)
Response #33 from: Bill D l
Date:
16 November, 2009 - 02:51 AM
(Archived Message - Members Only)
Boat Joinery and Cabinet Making Simplified by Fred Bingham details... List $24.95 Our Price $17.45
Boat Buyers Guide to Sportfishing Boats by Ed McKnew details... List $24.95 Our Price $17.45
Boat Mechanical Systems Handbook by Dave Gerr details... List $39.95 Our Price $27.95
The Cruising Life by Jim Trefethan details... List $22.95 Our Price $16.05
Don Caseys Complete Illustrated Sailboat Maintenance Manual by Don Casey details... List $59.95 Our Price $41.95
POWERTRAIN 
Level 1 Member
Level 3 Member
Forums Moderator
-Cummins Marine Cylinder heads-
